How to Fix Windows Can not Boot
What is your mind your mind friend Firdaustok? I know, you guys again for sure no matter your laptop / computer that can not boot or can not get into windows, just going around - going around just restart - restart continues. Perhaps this problem, it occurs because of damage and errors that occur due to the Master Boot Record (MBR) that crash or error. Other damage can also occur because of corupt windows registry or registry that was edited by a virus. Actually, you can still use the Windows Recovery or Repair Computer with a System Image backup if you ever do.
If this happens to your computer or laptop, follow the following Firdaustok way so that you can run Windows normally.
1. You must have a Windows 7 DVD tapes first. Whether it's Ultimate, Home Basic, Professional, Starter depending on the OS (Operating System) previously used. But if not, please go read to number 2.
2. Turn on your computer or laptop. By the time the BIOS screen appears, press the F2 or F12 to change First Boot. Change to the CD / DVD Room Drives, Hard Drive into a second from the top.
Usually in Windows 7 did not need to use the CD-Installer can do by pressing - pressed the F8 key until it appears as in the figure below :
3. If using the above method (as shown above can not, then do not have to use the Windows 7 installer CD, but if you can not use the Windows Installer CD mending 7 only) Insert a CD / DVD Master the Windows 7. Then, restart.
4. Press any key on the keyboard, when it says "Press Any Key To Boot From CD / DVD ..."
5. After the computer to boot via DVD Room, it will appear like this.
6. Click on "Repair Your Computer" as shown in the image above.
7. Wait a few detikt, because the computer will do a check and scan data. Then click Next or OK.
8. The way is easy and simple, because we only fix its MBR file is by using the Command Prompt, just click on the Command Prompt.
It will appear as a black box in cmd.
9. Select only one of which is below, I usually wear this command "bootsect.exe / nt60 all" why I choose this one? because its easy to remember and fix the MBR files throughout the hard drive partitions.
Type :
bootsect.exe / nt60 c:
bootsect.exe / nt60 all
Bootrec.exe / fixmbr
Bootrec.exe / fixboot
bootsect / nt60 all / force / mbr
Type one of course, and then press ENTER. If not it says The operation has been succesfull.
Try to type another command. Anyway if the command is successful, it will display the message "The Operation has been Succesully".
After that, click the Restart button below are adjacent to the Shut Down button.
If the above methods, it can not repair boot in your Windows system. Meaning you have to do a reinstall. However, nearly 90%, the above methods can overcome the problems often encountered that can not be entered until after loading Windows boot process. Good luck to friends Firdaustok.
Good luck :)
0 Komentar untuk "How to Fix Windows Can not Boot"